When building a plane from scratch you first need to decide if you want ailerons on your plane.  Some planes do better without ailerons wh...

Anyone that has had a RC car or truck has experienced the frustration of tearing your RC body from multiple wrecks.  After a while the body...

In this write up I will provide instructions how to thoroughly clean and revive those old dirty sealed bearings.  First, remove the be...

A Pull String control system works very well.  Make sure you install the pull string BEFORE you cover the plane.  MUCH EASIER!!! They ...

Building a custom Cowl In this write up I will show you how to make your own custom cowl.  This cowl will be stronger than the cowls y...

In a previous write up I showed you how to cut out and build your ailerons.  There are several ways to set up your ailerons and “power” th...

In this write up I will be providing walk through step-by-step instructions on how to assemble or rebuild your Team Associated diff....

1-First step, decide on placement for landing gear on the airplane.  Take in mind the CG when deciding this.  Cut a very thin piece of p...

In this write up I will be providing instruction on how to clean and revive those dirty stiff axle sliders in Traxxas vehicles.  Over time d...

I have helped so many people solder in my years of RC so I thought I would make a write up on how to solder wires onto a Deans type connecto...